Posts Tagged ‘ring’

17th September
2017
written by admin
Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring

Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring

Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring

Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring

Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring

Halloween Gifts roman lorica hamata. Material, Ring Size & Weaving Pattern. Chest-60 ” Length from shoulder-32 “. WITH BRASS HOOD AND LEATHER. It may be used for re-enactment. Is completely handmade, Antique Styling. The measurements are taken when the item is stretched in the measured direction. APO / FPO Military Addresses, Po Box address does not accepted by our courier service. Please make sure you agree to all of the following terms and conditions if you are an International customer. Please make sure that the item can be legally imported to your country. We are not responsible for any illegal importations. Thanks with Best Regards. The item “Halloween Gifts roman lorica hamata chain mail 9 mm flat rivited with solid ring” is in sale since Saturday, November 05, 2016. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “nauticalmausioum-6″ and is located in GHAZIABAD, UTTAR PRADESH. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • BRAND: nauticalmausioum-6
  • ERA: 1500
  • MATERIAL: MILDSTEEL
Comments Off
30th August
2017
written by admin
Chain Mail Legging Flat Riveted Solid Ring Medieval Chainmail Chausses Medium

Chain Mail Legging Flat Riveted Solid Ring Medieval Chainmail Chausses Medium

MS Chainmail Flat Riveted with Flat Washer Legging with Shoe Cover. Ring Type: 18G 9mm / Flat Rivet with Flat Washer Legging (Belt Fit) / Overall Length – 36 inches / Overall Length with Shoe Cover – 42 inches / Circumference at top (thigh) – 26 inches / Circumference at bottom – 14 inches / Finish: Original Oiled. Finish of the Leggings is Original oiled. This Flat Longings can be used as Sca, larp Drama, fancy dress party, Halloween, new year party. Medieval Chainmail Armor Legs for Sale. GUARANTEE OF MORE THEN 7100 SATISFIED BUYERS WORLD WIDE. Please Note : This Listing is for One Legging. Other Products Shown in Pictures are not part of this sale. Made from : 18 gauge MS Iron. Ring Diameter : 9 MM. Ring Type : Flat Riveted Ring with Flat Washers. Size : Standard Adult Size (can fit almost all adults). Ring Type: 18G 9mm. Flat Rivet with Flat Washer Legging. Overall Length – 36 inches. Overall Length with Shoe Cover – 42 inches. Circumference at top (thigh) – 26 inches. Circumference at bottom – 14 inche. One Pair Chainmail Legging Flat Riveted with Washer. Can it be used for reenactment? Other : This Chainmail armor is completely hand made, Antique Styling. The measurements are taken when the item is stretched in the measured direction. International parcels on these address. Different transit conditions like custom clearance, lack of proper address, address change or some other reasons. We reply within 24 hours. You are requested to please check with your country’s. Transit times may vary particularly during peak. Problem got in our product. Thanks for Visiting our Store. The item “Chain Mail Legging Flat Riveted Solid Ring Medieval Chainmail Chausses Medium” is in sale since Friday, May 16, 2014. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “bargain-megashop” and is located in INDIA. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
Comments Off
28th August
2017
written by admin
MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume RA

Please Note : This Listing is for one Chainmail Shirt. Other Products Shown in Pictures are not part of this sale. Inner Ring Diameter of Chainmail Shirt : 9 mm. Ring : 16 Gauge 9 mm. Ring Type : Round Riveted Rings with Flat Washer. Finish : Natural Oil Finish. Chainmail shirt Chest Size : 48 Inches. Very Important Please Read : This Chainmail shirt will fit a person of 38 chest Size. Chainmail shirt Sleeve Length from Armpit : 10 inches. Chainmail Shirt Sleeve Circumference : 20 inches. Chainmail Shirt Length from shoulder : 32 inches. Chainmail Shirt be used for reenactment? Other : This Chainmail armor is completely hand made, Antique Styling. The measurements are taken when the item is stretched in the measured direction. We reply within 24 hours. Transit times may vary particularly during peak periods. Thanks for Visiting our Store. The item “MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume RA” is in sale since Wednesday, January 06, 2016. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “medieval_costumes” and is located in INDIA. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Made from: High quality Heavy Round Riveted Rings
  • Inner Ring Diameter: 9 mm Mild Steel
  • Ring: 16 Gauge 9 mm
  • Ring Type: Round Riveted Rings with Flat Washer
  • Finish: Natural Oil Finish
  • Chest Size: 48 Inches
  • Sleeve Length from Armpit: 10 inches
  • Sleeve Circumference: 20 inches
  • Length from shoulder: 32 inches
Comments Off
25th August
2017
written by admin
Chain Mail Legging Flat Riveted Solid Ring Blackened ChainMail Chausses Armour

Chain Mail Legging Flat Riveted Solid Ring Blackened ChainMail Chausses Armour

CHAINMAIL LEGINGS FLAT RIVET WITH WASHER. MS Chainmail Flat Riveted Flat Washer Legging with Shoe Cover. Ring Type: 18G 9mm / Flat Rivet with Flat Washer Legging (Belt Fit) / Overall Length – 36 inches / Overall Length with Shoe Cover – 42 inches / Circumference at top (thigh) – 26 inches / Circumference at bottom – 14 inches / Finish: Blackended. Strong & Durable – Suitable for Real Sca, Larp, Role-play, Re-enactment. Rage estimated time, this time may vary as per transit conditions and locations. Medieval MS Chainmail Flat Riveted Flat Washer Legging with Shoe Cover. Metal : Solid Iron Steel. Ring Type: 18G 9mm Flat Rivet with Flat Washer Legging (Belt Fit) Overall Length – 36 inches Overall Length with Shoe Cover – 42 inches Circumference at top (thigh) – 26 inches Circumference at bottom – 14 inches Finish: Blackended. Can it be used for reenactment? Other : This Chainmail armor is completely hand made, Antique Styling. The measurements are taken when the item is stretched in the measured direction. Quality is a parameter where we make no compromises. Superior quality raw material is used in the manufacturing process. Quality check at each stage of manufacturing. All items Individual tested. Finally checked thoroughly before batch inception. Please Note : This is a Reproduction Item. Transit times may vary particularly during peak periods. We are manufacture and exporters of medieval chainmail shirts, medieval helmets, medieval swords, medieval armors, medieval gauntlets, medieval full suit of armors, medieval shoes, medieval costumes and many more medieval re-enactment replica items. Thanks for Visiting our Store. The item “Chain Mail Legging Flat Riveted Solid Ring Blackened ChainMail Chausses Armour” is in sale since Tuesday, May 17, 2016. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “armorshopusa” and is located in Roorkee. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
Comments Off
18th August
2017
written by admin
MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume

BEST QUALITY AT AFFORDABLE PRICE – BETTER FROM ANY BARGAIN. Please Note : This Listing is for one chainmail shirt Other Products Shown in Pictures are not part of this sale. Inner Ring Diameter of Chainmail Shirt : 9 mm. Ring : 18 Gauge 9 mm. Ring Type : Round Riveted Rings with Flat Washer. Finish : Natural Oil Finish. Very Important Please Read : This Chainmail shirt will fit a person of 38 chest Size. Chainmail Shirt Sleeve Circumference : 20 inches. International parcels on these address. Different transit conditions like custom clearance, lack of proper address, address change or some other reasons. We reply within 24 hours. You are requested to please check with your country’s. Transit times may vary particularly during peak. Problem got in our product. Thanks for Visiting our Store. The item “MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume” is in sale since Thursday, April 28, 2016. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “bargain-megashop” and is located in INDIA. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Inner Ring Diameter of Chainmail Shirt: Chainmail Shirt 9 mm
  • Ring: 18 Gauge 9 mm
  • Ring Type: : Round Riveted Rings with Flat Washer
  • Chainmail shirt Sleeve Length from Armpt: Chainmail shirt Sleeve Length from Armpit 10 inches
  • Chainmail Shirt Sleeve Circumference: Chainmail Shirt Sleeve Circumference 20 inches
  • Chainmail Shirt Length from shoulder: Chainmail Shirt Length from shoulder 32 inches
  • MAKER: RAJNI
Comments Off
18th August
2017
written by admin
MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume

BEST QUALITY AT AFFORDABLE PRICE – BETTER FROM ANY BARGAIN. Please Note : This Listing is for one chainmail shirt Other Products Shown in Pictures are not part of this sale. Inner Ring Diameter of Chainmail Shirt : 9 mm. Ring : 18 Gauge 9 mm. Ring Type : Round Riveted Rings with Flat Washer. Finish : Natural Oil Finish. Very Important Please Read : This Chainmail shirt will fit a person of 38 chest Size. Chainmail Shirt Sleeve Circumference : 20 inches. International parcels on these address. Different transit conditions like custom clearance, lack of proper address, address change or some other reasons. We reply within 24 hours. You are requested to please check with your country’s. Transit times may vary particularly during peak. Problem got in our product. Thanks for Visiting our Store. The item “MS Chain Mail Round Riveted Ring with Flat Washer Chainmail Haubrgeon Costume” is in sale since Thursday, April 28, 2016. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “bargain-megashop” and is located in INDIA. This item can be shipped worldwide.
  • Country/Region of Manufacture: India
  • Inner Ring Diameter of Chainmail Shirt: Chainmail Shirt 9 mm
  • Ring: 18 Gauge 9 mm
  • Ring Type: : Round Riveted Rings with Flat Washer
  • Chainmail shirt Sleeve Length from Armpt: Chainmail shirt Sleeve Length from Armpit 10 inches
  • Chainmail Shirt Sleeve Circumference: Chainmail Shirt Sleeve Circumference 20 inches
  • Chainmail Shirt Length from shoulder: Chainmail Shirt Length from shoulder 32 inches
  • MAKER: RAJNI
Comments Off
17th August
2017
written by admin
Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay

This spaulder is initially priced in BLACK but can be made in other colors, the initial listing price is for black. Some colors, such as solid browns and some other colors without outline work, do not change the start price. Very, very rarely do I actually need the full 30 days, that time frame simply covers me during heavy traffic times and certain times of the year when orders tend to pile up. I generally require closer to two weeks with some builds being faster, some a bit longer. Due to variations available, it is impossible for me to have on stock and list every possibility. Prices may vary for custom requests, please contact me with any and all questions. The number available listed above does not represent the actual number on hand. Important: From time to time I can get extremely busy and backed up. This price includes the 8-9 ounce leather upper piece that is riveted to the number one lame of the spaulder as well as the neck guard itself. The neck guard is two pieces of 8-9 ounce leather riveted together so that you get the skin side of the leather on both sides rather than the rough side being exposed on one side. The neck guard passes through the upper layer of 8-9 ounce leather on the number on lame and then spays out underneath it so that it is sandwiched between the base and upper piece. Screw posts are then run through all three layers to attach the neck guard and keep it firmly in place. Keep in mind, with the neck guard in place, helmets with horns mounted down, wings, etc. May hit the neck guard and interfere with overall wearability. This spaulder is made from. 10-11 ounce leather with the double layer top detail piece on the number one lame being made from 8-9 ounce leather. I hand cut, dye, and seal these spaulders for weather resistance, as well as done some basic line work to give accent details. I have laced in rows of rings – a total of 16 nickel plated steel rings! – over the bracers using a 1/2 inch leather strap woven in and out of the 9 oz leather through 64 oblong holes that I have punched in. The arm/bicep strap has been left long so it can be custom cut to length or, as I prefer to do, be folded back under and tucked under the keeper. I have quite a bit of versatility and range worked into the chest belt/strap setup for a wide range of body sizes and fits. This set up will be made to be worn on the left or the right shoulder per your request, but can be adjusted via screw posts on the larger chest belt set up as well as the lower arm belt set up so it can actually be worn left or right side as you prefer. This is a design I came up with, patterned and made myself. It is not some machine punched piece, produced in bulk and put together by a gaggle of half starved orphan kids. Has the entire world lost it’s mind? All of my items are produced as costume items and pieces only. Be sure to LIKE my page on Facebook. I have lots of pics and examples on there. Just search for Oristian Subculture. The item “Single Leather Ring Mail Spaulder Armor Ren SCA articulated pauldron cosplay” is in sale since Saturday, November 03, 2012. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “cnmrobinson” and is located in Texarkana, Texas. This item can be shipped worldwide.
Comments Off
17th August
2017
written by admin
Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP

This spaulder is initially priced in BLACK but can be made in other colors, the initial listing price is for black. Some colors, such as solid browns and some other colors without outline work, do not change the start price. Very, very rarely do I actually need the full 30 days, that time frame simply covers me during heavy traffic times and certain times of the year when orders tend to pile up. I generally require closer to two weeks with some builds being faster, some a bit longer. Due to variations available, it is impossible for me to have on stock and list every possibility. Prices may vary for custom requests, please contact me with any and all questions. The number available listed above does not represent the actual number on hand. Important: From time to time I can get extremely busy and backed up. This price includes the 8-9 ounce leather upper piece that is riveted to the number one lame of the spaulder as well as the neck guard itself. The neck guard is two pieces of 8-9 ounce leather riveted together so that you get the skin side of the leather on both sides rather than the rough side being exposed on one side. The neck guard passes through the upper layer of 8-9 ounce leather on the number on lame and then spays out underneath it so that it is sandwiched between the base and upper piece. Screw posts are then run through all three layers to attach the neck guard and keep it firmly in place. Keep in mind, with the neck guard in place, helmets with horns mounted down, wings, etc. May hit the neck guard and interfere with overall wearability. This spaulder is made from 10-11 ounce leather. I have hand cut, dyed, and sealed this spaulder for weather resistance, as well as done some basic line work to give accent details. The arm strap has been left long so it can be custom cut to length or, as I prefer to do, be folded back under and tucked under the keeper. I have quite a bit of versatility and range worked into the chest belt/strap setup for a wide range of body sizes and fits. This set up will be made to be worn on the left or the right shoulder per your request, but can be adjusted via screw posts on the larger chest belt set up as well as the lower arm belt set up so it can actually be worn left or right side as you prefer. This is a design I came up with, patterned and made myself. It is not some machine punched piece, produced in bulk and put together by a gaggle of half starved orphan kids. Has the entire world lost it’s mind? All of my items are produced as costume items and pieces only. Be sure to LIKE my page on Facebook. I have lots of pics and examples on there. Just search for Oristian Subculture. The item “Single Leather Basic Cloven Hoof Ring Mail Spaulder Armor cosplay pauldron LARP” is in sale since Wednesday, December 11, 2013. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “cnmrobinson” and is located in Texarkana, Texas. This item can be shipped worldwide.
Comments Off
16th August
2017
written by admin
Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Very, very rarely do I actually need the full 30 days, that time frame simply covers me during heavy traffic times and certain times of the year when orders tend to pile up. I generally require closer to two weeks with some builds being faster, some a bit longer. Due to variations available, it is impossible for me to have on stock and list every possibility. Prices may vary for custom requests, please contact me with any and all questions. The number available listed above does not represent the actual number on hand. Important: From time to time I can get extremely busy and backed up. This set of bracers is initially priced in black but can be made in other colors, the initial listing price is for black. Just get with me and we can discuss options and prices. Start price of listing is for black. The pictures do not do this piece justice! These bracers are made from two layers of heavy 9 ounce black dyed leather. The main, or base piece, gives total coverage of the forearm, while the upper piece gives a double layer of protection over the top and sides of the forearm and elbow. I have hand cut, dyed, and sealed these bracers for weather resistance, as well as done some basic line work to give accent details. I have laced in rows of rings – a total of 40 nickel plated steel rings! – over the bracers using a 1/2 inch leather strap woven in and out of the 9 oz leather through 160 oblong holes that I have punched in. These bracers have been made wide so that the “wings” can overlap underneath giving total forearm protection to the wearer. Please keep in mind, huge Popeye style arms may not allow for the overlap and total coverage underneath, but will still cover more of your forearms than most of the bracers available! The straps have been left long so they can be custom cut to length or, as I prefer to do, be folded back under and tucked under the keeper – as shown in the pics below. This is a design I came up with, patterned and made myself. It is not some machine punched piece, produced in bulk and put together by a gaggle of half starved orphan kids. Has the entire world lost it’s mind? All of my items are produced as costume items and pieces only. Be sure to LIKE my page on Facebook. I have lots of pics and examples on there. Just search for Oristian Subculture. The item “Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA” is in sale since Sunday, July 22, 2012. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “cnmrobinson” and is located in Texarkana, Texas. This item can be shipped worldwide.
Comments Off
16th August
2017
written by admin
Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA

Very, very rarely do I actually need the full 30 days, that time frame simply covers me during heavy traffic times and certain times of the year when orders tend to pile up. I generally require closer to two weeks with some builds being faster, some a bit longer. Due to variations available, it is impossible for me to have on stock and list every possibility. Prices may vary for custom requests, please contact me with any and all questions. The number available listed above does not represent the actual number on hand. Important: From time to time I can get extremely busy and backed up. This set of bracers is initially priced in black but can be made in other colors, the initial listing price is for black. Just get with me and we can discuss options and prices. Start price of listing is for black. The pictures do not do this piece justice! These bracers are made from two layers of heavy 9 ounce black dyed leather. The main, or base piece, gives total coverage of the forearm, while the upper piece gives a double layer of protection over the top and sides of the forearm and elbow. I have hand cut, dyed, and sealed these bracers for weather resistance, as well as done some basic line work to give accent details. I have laced in rows of rings – a total of 40 nickel plated steel rings! – over the bracers using a 1/2 inch leather strap woven in and out of the 9 oz leather through 160 oblong holes that I have punched in. These bracers have been made wide so that the “wings” can overlap underneath giving total forearm protection to the wearer. Please keep in mind, huge Popeye style arms may not allow for the overlap and total coverage underneath, but will still cover more of your forearms than most of the bracers available! The straps have been left long so they can be custom cut to length or, as I prefer to do, be folded back under and tucked under the keeper – as shown in the pics below. This is a design I came up with, patterned and made myself. It is not some machine punched piece, produced in bulk and put together by a gaggle of half starved orphan kids. Has the entire world lost it’s mind? All of my items are produced as costume items and pieces only. Be sure to LIKE my page on Facebook. I have lots of pics and examples on there. Just search for Oristian Subculture. The item “Leather Ring Mail Bracers with Elbows Armor SCA LARP vembracers medieval arm SCA” is in sale since Sunday, July 22, 2012. This item is in the category “Collectibles\Militaria\Pre-1700\Reenactment & Reproductions”. The seller is “cnmrobinson” and is located in Texarkana, Texas. This item can be shipped worldwide.
Comments Off
Previous